User's Manual

57
User Interface Configuration
Enter the desired values by referring to RIP configuration parameters table and click
on Add button.
Table 26: RIP configuration parameters
Parameter
Description
Routing
Protocol
Allows you to select the RIP protocol from the drop down menu.
 Disable
 RIP
Following parameters are displayed only when Routing Protocol is selected as 'RIP'.
Interface
Allows you to select the interface from the drop down menu.
Receive
Mode
Allows you to select the receive mode from the drop down menu.
 NONE
 RIP1
 RIP2
 Both
Send Mode
Allows you to select the send mode from the drop down menu.
 NONE
 RIP1
 RIP2
 RIP1 COMPAT
RIP Config
Table
This table lists the interfaces configured with RIP. Select the check box
against the desired interface for deletion and click on Delete Selected
button.
To delete all configured interfaces on the pane, click on Delete All button.
Check box against all interfaces on the page will get selected and will be
deleted.