User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
52
TJ2100N-14ET User Manual
Ping6
1. Go to Diagnostics->Ping6 in the navigation pane. Ping6 Diagnostics page is
displayed. This page is used to send ICMPv6 ECHO_REQUEST packets to network
host. The diagnostic result will then be displayed.
2. Enter the Host Address and WAN Interface from the drop down and click on Go
button.
3. ICMPv6 ECHO_REQUEST packets will be sent to the defined host and the success
message will be displayed.
Figure 24: Ping6 Diagnostics