User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
51
User Interface Configuration
Diagnostics
This section details the diagnostics related information.
Ping
1. Go to Diagnostics->Ping in the navigation pane. Ping Diagnostics page is
displayed. This page is used to send ICMP ECHO_REQUEST packets to network host.
The diagnostic result will then be displayed.
2. Enter the Host Address and WAN Interface from the drop down and click on Go
button.
3. ICMP ECHO_REQUEST packets will be sent to the defined host and the success
message will be displayed.
Figure 23: Ping Diagnostics