User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
35
User Interface Configuration
Select or enter the desired values by referring to WLAN Security Settings parameters
table and click on Apply Changes button to save the changes.
Table 14: WLAN Security Settings parameters
Parameters
Description
SSID Type
Allows you to select the SSID type from the drop down menu.
Encryption
Allows you to select the type of data encryption required for the specific
SSID from the drop down menu.
None
WEP
WPA2
WPA2 Mixed
802.1x
Authentication
Allows you to select the check box for 802.1x authentication standard. On
selecting this check box, following parameters are displayed:
RADIUS Server: Enter the IP address, UDP port number and
shared secret key of the RADIUS (Remote Authentication Dial-In User
Service) server. The port number is usually 1812 to 1645 and depends
upon the server.
Backup RADIUS Server: Enter the IP address, UDP port number
and shared secret key of the backup RADIUS server.