User's Manual

33
User Interface Configuration
Parameter
Description
Tx beamforming
Allows you to enable or disable beamforming transmission by selecting
desired radio button. This allows you to focus on a wireless signal
towards a specific receiving device, rather than having the signal spread
in all directions from a broadcast antenna
MU MIMO
Allows you to enable or disable MU-MIMO transmission by selecting
desired radio button. This parameter is displayed only when Tx
beamforming is enabled.
Multi-user MIMO (MU-MIMO) is a set of multiple-input and multiple-
output (MIMO) technologies for wireless communication, in which a set
of users or wireless terminals, each with one or more antennas,
communicate with each other.
Multicast to
Unicast
Allows you to enable or disable multicast to unicast conversion by
selecting desired radio button.
When enabled, multicast packets may be replaced by one unicast packet
per destination station. Each unicast packet is transmitted at the highest
speed the destination station will accept.
Band Steering
Allows you to enable or disable band steering feature by selecting
desired radio button.
The band steering feature encourages dual-band-capable clients to stay
on the 5 GHz band on dual-band APs for maximizing throughput. This
ability frees up resources on the 2.4 GHz band for single-band clients.
WMM Support
Allows you to enable or disable Wireless Multimedia (WMM) support by
selecting desired radio button.
802.11k Support
Allows you enable or disable 802.11k standard support by selecting
desired radio button.
802.11v Support
Allows you enable or disable 802.11k standard support by selecting
desired radio button.
NOTE: This parameter is displayed only when 802.11k
Support is enabled.