User's Manual

29
User Interface Configuration
Parameter
Description
SSID
Allows you to enter the SSID name (Service Set Identifier) in the text box
provided.
An SSID is a unique ID that consists of 32 characters and is used for
naming wireless networks. When multiple wireless networks overlap in a
certain location, SSIDs make sure that data gets sent to the correct
destination.
Channel Width
Allows you to select the channel width from the drop down menu. Channel
width basically controls how broad the signal is for transferring data.
For wlan0 (5GHz):
 20MHz
 40MHz
 80MHz
For wlan1 (2.4GHz):
 20MHz
 40MHz
Control
Sideband
Allows you to select the Control Sideband from the drop down menu.
The Control Side Band field defines the sideband which is used for the
secondary or extension channel when the AP is operating in 40 Mhz channel
width.
For wlan0 (5GHz): Auto
For wlan1 (2.4GHz):
 Upper
 Lower
Channel
Number
Allows you select the channel number from the drop down menu.
For wlan0 (5GHz):
 Auto (DFS)
 36 to 64 (integral multiples of 4)
 100 to 112 (integral multiples of 4)
 149 to 161 (integral multiples of 4)
For wlan1 (2.4GHz):
 Auto
 5 to 11
Radio Power
(%)
Allows you to set the power consumption of WiFi router from the drop down
menu.
 100%
 70%
 50%
 35%
 15%