Instruction Manual

VOLTAGE
Before first use, ensure that the voltage, frequency and power of your appliance are
suitable for your electrical supply.
Your appliance can function using an unearthed plug. It is a class II appliance (double
electrical insulation ).
The installation and use of the appliance must, however, comply with the standards
in force in your country.
OPERATING INSTRUCTIONS
Before use, always ensure that:
• the appliance is placed on a stable horizontal support,
• the appliance is positioned in accordance with the instructions in this manual.
Buttons B, C and D, as described below, can only be used once the appliance has
been switched on and may be used simultaneously.
• Button C, oscillation control:
- If you press button C once, the fan will oscillate horizontally.
- To stop the oscillation, press button C again.
• Button D, programming the automatic shut-off of the appliance:
You have 3 choices: 1, 2 or 4 hours of operation.
- If you press button D once, the 1-hour timer starts and the 1-hour light comes on.
- If you press button D a second time, the 2-hour timer starts and the 2-hour light
comes on.
- If you press button D a third time, the 4-hour timer starts and the 4-hour light comes on.
To switch off the 'TIMER' function, press button D again.
2
E
N
1 hour 2 hours 4 hours
STOP
VU9050_1800134191-01_ARTIK-CRYSTAL_1800134191/01 12/09/14 14:02 Page2