Operation Manual

8
Problems Causes Solutions
The appliance stopped
while in use
Overload
Follow the instructions in section
Overload.
The silicon gasket is missing or not
correctly positioned.
Place the silicone gasket correctly
on the motor unit.
Excessive vibrations
The product is not placed on a flat
surface.
Place the appliance on a flat
surface.
Volume of ingredients is too high.
Reduce the quantity of ingredients
processed.
The silicon gasket is missing or not
correctly positioned.
Place the silicone gasket correctly
on the motor unit.
Leak from the lid
Volume of ingredients is too high.
Reduce the quantity of ingredients
processed.
The lid is not correctly positioned
Place the lid correctly on the
blender jug.
Leak from the bottom of
the blender jug
Deterioration of the
watertightness of the appliance
Caution : the blades are not
removable.
Contact the consumer service, see
contact information in the
warranty leaflet.
The blades do not turn
easily
Pieces of food too large or too
hard.
Reduce the size or quantity of
ingredients processed.
The blended liquid is too hot and
distorted the silicone gasket.
Replace the gasket with a new
one.
SM_BLENDER_TITAN_8080016924_EE.qxp_Mise en page 1 20/12/2016 11:34 Page8