User guide

ManualsBrandsTeeJet ManualsComputersMatrix Pro 840G Start Up Guide

Q U I C K S TA R T  U P G U I D E

TeeJet Technologies

1801 Business Park Drive

Springeld, Illinois 62703 USA

Tel: (217) 747-0235 • Fax: (217) 753-8426

For a complete English User Manual, go to www.teejet.com

or order part number 98-05238

Summary of content (9 pages)

PAGE 1
Q u i c k S ta r t - u p G u i d e TeeJet Technologies 1801 Business Park Drive Springfield, Illinois 62703 USA Tel: (217) 747-0235 • Fax: (217) 753-8426 For a complete English User Manual, go to www.teejet.
PAGE 2
Start Press the POWER BUTTON to power on the console. Upon power up, the Matrix Pro will begin its Start Up Sequence. To turn the power off, press and briefly hold the power button until a confirmation screen acknowledges shut down mode. WARNING! Wait 30 seconds before restarting the console after powering off.
PAGE 3
Configure #5 Cultural Setup #6 Vehicle Setup #7 Implement Setup 1. Press CONSOLE side tab . 2. Press Cultural . 3. Select from: – defines the system measurements ►Units – defines the system language ►Language – establishes the local time zone. ►Time Zone 1. Press CONFIGURATION side tab . 2. Press Vehicle . 3.
PAGE 4
Go #9 Go To Guidance Screen #10 Choose a Guidance Mode Figure 1-15: Vehicle View Guidance 1. Press NAVIGATION & GUIDANCE OPTIONS icon display navigation options. 2. Press GUIDANCE MODE icon . 3. Select from: ►Straight AB ►Curved AB ►Circle Pivot ►Last Pass ►NextRow 6.0 mph < 0.0 > 7.6 ac Figure 1-18: Choose a Guidance Mode 0.0 mph Mark A 0 ac Figure 1-16: Field View Guidance 6.0 mph Mark A A A 0 ac #11 Mark A and B Points to Figure 1-20: Mark B Point To establish a AB guideline: 1.
PAGE 5
information on Guidance Modes Straight AB Guidance Straight AB guidance provides straight line guidance based on A and B reference points. The original A and B point are used to calculate all other parallel guidelines. -13 8.9 < Guidance Bar 7.2 mph Horizon Compass Vehicle with Real-time Representation of Active Boom Sections Navigation and Guidance Options Curved AB Guidance Curved AB Guidance provides guidance along curved lines based on an initial AB reference line.
PAGE 6
Guidance Features Overview Navigation Activity & Boom Status Guidance Options Guidelines Boundaries Mark Boundary. Establishes application area and determines no apply zones. Boundary is established to the outside of an applied pass. Grayed = GPS is unavailable. Mark A . Marks the first point of the guideline. A B Mark B . Marks the end point of the guideline. Grayed = minimum distance has not been traveled. Finish Boundary. Finalizes boundary process.
PAGE 7
Guidance Features Details Figure 1-7: Save Guideline A A+ Nudge Feature -13 To adjust a AB guideline to your current location: 1. Press NAVIGATION & GUIDANCE OPTIONS icon display navigation options. > 0.0 < 7.2 mph Would you like to name this guideline? Yes A Azimuth Degree No To establish the azimuth guideline: 2. Press AZIMUTH icon A to enter azimuth degree. 3. Use the entry screen to establish the Azimuth degree. 4.
PAGE 8
Matrix FieldPilot BoomPilot Optional Accessory To show other saved guidelines: 1. Drive to the desired location of Return Point . 2. Press NAVIGATION & GUIDANCE OPTIONS icon display navigation options. to . 1. Press NAVIGATION & GUIDANCE OPTIONS icon display navigation options. GPS Antenna 78-50155 78-50190 w/GLONASS to Figure 1-13: Next Guideline Figure 1-12: Return Point Established - Vehicle View Mark A -13 8 Pos. 45-05765 8 Pos. Speed/Sense Cable . 2.
PAGE 9