Instruction Manual

14
www.teejet.com
Fieldware
®
Link 4.02
TeeJet spreader implement type
NOTE: Loading a spreader implement type onto a console that
has not had the spreader ABSC feature unlocked is not
permitted.
Basic properties
►Description – used to enter the name of the machine settings
prole.
►GPS antenna height – used to measure the height of the
antenna from the ground. Range is 0.0 to 10.0 metres.
►Guidance width – used to enter the distance between the
guidelines. Range is 1.0 to 75.0 metres.
►Implement type – used to select Spreader as the layout of
the sections for the applied product location.
►Implement offset direction  – direction from the centreline
of the machine to the centre of the implement while facing in
the machine’s forward direction
►Implement offset distance  – used to enter the distance
from the centreline of the machine to the centre of the
implement. Range is 0 to 10.0 metres.
►Antenna to disks distance  – used to enter the distance
from the GPS antenna to the delivery disks or dispersal
mechanism. Range is 0.0 to 50.0 metres.
►Number of implement sections – used to select the number
of implement sections. When ABSC Enabled is unchecked,
number of implement sections is set to one implement
section and is unavailable for editing.
►Tank capacity – used to enter the capacity of the tank
►ABSC enabled – used to enable ABSC (automatic boom
section control) options
• Unchecked – single section setup options will be available
• Checked – Smartcable or SDM setup options will be
available (see “ABSC enabled – Smartcable or Section
Driver Module setup” section for details)
Implement dynamics
►Setup type – used to select TeeJet spreader type
►Spread offset distance  – used to enter the offset distance
from the disks, or dispersal mechanism, to where product
initially hits the ground. Range is 0.0 to 75.0 metres.
►Section width (under Working width in Matrix Pro GS v3.xx) –
used to enter the total width of the implement.
►Spread length  – used to enter the length of application for
the section. Range is 0.0 to 75.0 metres.
Job specic defaults
There are no available options.
Figure 31: Basic properties
Figure 32: Implement offset distance and direction
Figure 33: Machine settings – TeeJet spreader implement type