Install Miller 22xx T T-SS T-ET HT Owner's manual

FieldPilot

98-05232 R0

4. install the steerinG hoses and adaPters

Locate the steering hose connections at the machine steering orbital. Disconnect the two steering hoses (make

sure to label them rst) and install run tees (N). Reconnect original hoses to the run of the tees. Then connect

hoses (K) from the branch of the run tees to the A & B ports of the FieldPilot valve. The hoses will route down

from FieldPilot valve and underneath the cab to the branch of the run tees at steering orbital.

Figure 1-7: Install the Steering Hoses and Adapters