Install Miller 22xx T T-SS T-ET HT Owner's manual

FieldPilot

98-05232 R0

1. PrePare the FieldPilot ValVe

Install adapters (P) in the P & T ports. Install adapters (M) in the A & B ports. Finally, install adapter (O) in the

LS port.

Figure 1-4: Prepare the FieldPilot Valve

2. install the FieldPilot ValVe Bracket

Identify valve mounting location. Wrap strap (J) around main cross over beam so that mounting holes are facing

the tank. Next attach bracket (I), so that mounting holes for the FieldPilot valve are facing the tank, to bracket (J)

using (2) (C) 3/8” x 16 x ¾” bolts and (2) (H) 3/8 nuts as depicted.

Figure 1-5: Install Mounting Bracket for FieldPilot Valve

C & H