Install John Deere 7x20 Series User guide

www.teejet.com
9
FieldPilot
®
1. PREPARE THE FIELDPILOT VALVE
Install adapters (P) in the P & T ports. Install adapters (M) in the A & B ports.
Finally, install adapter (O) in the LS port.
Figure 1-4: Prepare the FieldPilot Valve
2. PREPARE THE POWER BEYOND BLOCK
Remove the three plugs from the P, T and LS ports of the Power Beyond Block.
Put o-ring (T) on adapters (R) and install adapters (R) in the P & T ports of the Power Beyond block.
Then put o-ring (S) on adapter (Q) and install adapter (Q) in the LS port.
Figure 1-5: Prepare The Power Beyond Block
O
M
M
P
P
R w/T
Q w/S
P Port
T Port
LS Port
Power Beyond Block