Install John Deere 6500 & 6700 Hi-Cycle Instruction Manual

www.teejet.com
8
FieldPilot
®
INSTALLATION
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to
the changes in component specications the parts supplied in the kit are not exactly as presented
in this document, please contact your dealer or TeeJet Customer service representative for
clarication before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of
the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY
DON’T INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
NOTE: All references to left and right are stated as if the user is seated in the driver’s seat.
1. PrePare the FieldPilot ValVe
Install adapters (S) in the P and EF ports of the FieldPilot valve (C). Attach adapter (R) onto adapter (S) in
the P port. Install adapters (Q) in the A, B, and T ports. Then attach adapter (P) onto adapters (Q) in the A
& B ports.
Figure 1-2: Prepare the FieldPilot Valve
S
R
S
Q
Q
Q
P