Install John Deere 4x40, 4X50 & 4X55 Owner manual

www.teejet.c om

FieldPilot

8. iNstall steeriNg hoses aNd adaPters

Disconnect the two steel lines that are at the rewall just below the windshield. Install run tees (Z) and

reconnect the original steel line to the run of the tee. Connect a hose (S) to each of the branches of the run

tee and route them down and connect to the A & B ports of the FieldPilot valve.

Figure 1-9: Install Steering Hoses and Adapters

Disconnect