Install Case SPX 4260b Manual

www.teejet.com

FieldPilot

5. install steerinG hoses

Install the steering hoses (I) by connecting the end with the 90° tting to the branch of the Run Tees and

route the other end to the FieldPilot valve. Connect them to the ttings in the A and B ports.

Figure 1-6: Install Steering Hoses

6. install the PressUre hose

Install the Pressure hose (J) by connecting the end with the 90° tting to the tting in the P port on the

FieldPilot Valve. Route the other end to the branch of Run Tee (M) installed in the orbital P port in Step 4.

Figure 1-7: Install Pressure Hose