Install Case SPX 4260b Manual
www.teejet.com
9
FieldPilot
®
INSTALLATION
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to
the changes in component specications the parts supplied in the kit are not exactly as presented
in this document, please contact your dealer or TeeJet Customer service representative for
clarication before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of
the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY
DON’T INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
1. PrePare the FieldPilot ValVe
Install ttings (N) in the A, B, P and T ports of the valve. Install plug (O) in the LS port.
NOTE: All references to left and right are stated as if the user is seated in the driver’s seat.
Figure 1-2: Preparing FieldPilot Valve
N
N
N
N
O