Install Case SPX 3150-3185 Owner manual

10
www.teejet.com
FieldPilot
®
3. install the FieldPilot ValVe
Using items (B, F, and G), mount the FieldPilot Valve to the bracket. The P port should be facing up.
Figure 1-6: Installing the FieldPilot Valve
4. install tank Fittings and hose
Disconnect the tank hose from the orbital and install run tee tting (N). Reconnect original hose to the run of the
tee. Connect hose (I) from the T port on the FieldPilot Valve to the run of the tee (N).
Figure 1-7: Installing the Tank Fittings and Hose
Tank
Port
N
I
B, F, G