Install AGCO RT120A-RT155A Owner manual

www.teejet.com
12
FieldPilot
®
5. install the steering hoses and adaPters
Locate the steering orbital L and R ports. Disconnect the hoses from those ports (mark them for reinstallation
later). Remove the ttings from the orbital. Install the o-ring (EE) onto adapter (X). Install adapters (X)
in the L and R ports. Install run tees (P) to adapters (X). Install adapters (W) to the run of the tees (P).
Reconnect original steering hoses to adapters (W). Route hoses (M) from the orbital back to the FieldPilot
Valve. The smaller ends of hoses (M) will connect to the A & B ports of the FieldPilot valve.
NOTE: The (M) hoses in the pictures indicate a 90° end at the orbital. They will be straight ends, and 90°
adapters (U) are included and can be used if necessary to connect hoses (M) at the orbital.
Figure 1-6: Install the Steering Hoses and Adapters