Install AGCO RoGator 1254

www.teejet.com
15
FieldPilot
®
10. installation oF engage/disengage switch
Connect item (A) to the connector on the SCM harness labeled Remote Engage/Disengage. Install the push
button in a location that is easily accessible during operation of the machine. This switch (A) is not required
if the optional foot switch 32-04020 is used.
Figure 1-10: Engage/Disengage Switch
11. recoMMended electronics installation
The Steering Control Module (SCM) should be mounted securely to the oor of the cab. The control console
can be mounted to the operator’s preference. The GPS antenna should be mounted on top of the cab on a
metal surface of at least 4” square.
Figure 1-11: Recommended Electronics Installation
SCM
GPS