User Manual

CenterLine
Software Version 1.05
System Setup
System setup allows the selection of settings that effect the entire CenterLine product. There are
only two settings: Units and Language (See Table 10).
Figure 25: System Setup
Setting Name Default Value
Change at 1st
Time Start Up
Unit US Optional
Language English Optional
Table 10: System Menu Item Default Settings
Units
System Units allows the selection of either US and Metric units (See Table 11).
To change the System Units, enter System Setup, scroll through the sub-menu list until <UNITS>
appears in the text window, and press Enter. Next scroll between the two units choices, <MET
-
RIC> and <US>. When the desired unit is displayed, press the Enter key. The software should
bring you back to <UNITS>.
Figure 26: Setting System Units
CenterLine
CenterLine Setup
24