Manual

98-05074 R3

70 Series Fill Flow

View from cable side

Contact Description

2 Flow meter signal (white/red wire)

5 Automatic ﬁ lling output (white wire)

9 Power supply sensor (brown wire)

10 GND sensor (green wire)

NOTES: Automatic ﬁ lling output is limited to maximum 1

Amp. If additional is required, please us a relay.

When ﬁ lling, the unit outputs 12 Volts.

When ﬁ lled, the output is an open circuit.

CLR

70 Series

200>Gal

150 Gal

Main Harness

45-05436

Pos Color Function

ABrown (+V)

B Wht/Red Signal

C Green Ground

Pos Color Function

ARed (+12V)

BBlackGround

Power Supply

71 Fill Flow Monitor

75-30012

Flowmeter

To Battery

Power Cable

45-05381

D C B A

To valve

Flowmeter

3 pos. Deutsch pins

TeeJet

UTC

D-Series

TeeJet 801

PAGE 1
70 Series Fill Flow Contact Description 1 2 Flow meter signal (white/red wire) 3 4 View from cable side 5 Automatic filling output (white wire) 6 7 NOTES: Automatic filling output is limited to maximum 1 Amp. If additional is required, please us a relay. When filling, the unit outputs 12 Volts. When filled, the output is an open circuit.
PAGE 2
Part Number Flow Meter Calibration Number Pulses/Liter Input Number for 70 Console Calibration Number Pulses/Gallon 90-50230 TeeJet 801 83 314 57-00079 LH-10D 242 916 57-00080 LH-16D 79 299 57-00081 LH-20D 50 189 57-00082 LH-26D 24 91 57-00094 LH-40D 21 79 Pulses per liter x 3.785 = Pulses per gallon (input into 70 console) Pulses per gallon / 3.785 = Pulses per liter (input into 70 console) 2. Generality Function Key Description 1.