Operation Manual

-- 27 -- .
TROUBLE SHOOTING
QUESTIONS ANSWERS SOLUTIONS
- Batteries have no power - Replace all batteries with
new one.
- Installing batteries
incorrectly
- Observing the polarities of
battery, then re-install all
batteries again.
Can not turn on the radio.
- Key knob function is
being activated.
- Press the [ ] button to
deactivated it.
- Batteries have no power - Replace all batteries.Radio turn off while
listening.
- Sleep timer is being
activated.
- Turn on the radio again.
During ATS, some
station
cannot be stored.
- Frequency of stations are
too weak.
- Search the station manually
Some stored station with
noise.
- There is interference near
by your area.
- Low down the antenna or
move to other location and try
again.
Only limited FM stations
can be received.
- FM frequency might be
set as 76~90 MHz
accidentally.
- Turn off the radio, press &
hold the [FM SET] button to
select the accurate FM
frequency range.
Poor AM reception in
USA.
- USA is using 10 kHz
AM
tuning step not 9 kHz.
- Turn off the radio press the
[9/10kHz] button to select
accurate tuning step.
The sound of SW SSB
broadcasting is too low.
The default bandwidth is
Narrow band.
Press the [AM BW] button to
select the Wide band.
- Did not set the proper
radio station for the alarm.
- Preset your alarm station
properly
When the alarm is on,
there is only noise with
the broadcast.
- Or there is no
broadcasting at that radio
station.
- Or you are in another city
where does not have a
radio station for your
preset frequency.
- Make sure it has radio
broadcast in your location.