Operation Manual

-- 21 -- .
SETTING TUNING STEP
The intelligent tuning step function is
activated by default. You can also press &
hold the [STEP] button to select fast / slow
tuning with radio on. FAST/SLOW tuning is
shown in the chart below for each band.
TUNING STEP
FAST/SLOW TUNING STEP
("Fast/Slow" flashing on display)
SLOW TUNING STEP
("Slow" flashing on display)
BAND
Slowly rotate the
[TUNING] knob
with "Slow"
indicates on display
Quickly rotate the
[TUNING] knob
with "Fast"
indicates on display
Quickly / Slowly rotate the
[TUNING] knob
FM 0.01 MHz 0.1 MHz 0.01 MHz 0.01 MHz
MW 1 kHz 9 kHz / 10 kHz 1 kHz 1 kHz
LW 1 kHz 9 kHz 1 kHz 1 kHz
SW 1 kHz 5 kHz 1 kHz 1 kHz
AIR 1 kHz 25 kHz 1 kHz 1 kHz
FM ST. (FM STEREO)
1. While listening to FM stereo stations, press the [FM ST.] button with " "
appears in the display to activate the "STEREO" listening. If the received FM
broadcast signal is too weak, it is recommendable to turn off the stereo function
by pressing the [FM ST.] button again with "
" disappears.
2. While listening to FM stereo stations by speaker, it is recommendable to turn off
the stereo function by pressing the [FM ST.] button with " " disappears to
improve sound quality.
3. The stereo function will not be activated and " " will not appear if the FM
station is not stereo broadcasting.