Operation Manual

-- 13 -- .
WORKING WITH STATION MEMORIES
There are 2000 memories for PL-660, which has great flexibility of memory storage.
Please note the chart below:
1. Memory PAGE 0, rioted as [P0], consists of 800 memories, 100 assigned for
FM/MW/LW, 200 for SW & SSB and 100 for AIR BAND.
2. Memory PAGE 1~12, noted as P1, P2, etc., each page consists of 100 memories,
in total 2000 memories.
MEMORY
Memory for each Band (800) Memory among all Band (1200)
BAND
PAGE P0 ATS PAGE 01~12 ATS
FM 100 V
MW 100 V
LW 100 V
SW 200 V
SSB 200 X
AIR 100 X
Each Memory
Page can store
100 Memories.
ATS is available
for all Memory
Page (except SSB
& Air Band)
METHOD 1: STORING STATION MANUALLY
1. Press the [FM], [MW/LW] or [SW] button for band selection, then tune into
your desired station.
2. Press the [MEMORY] button with the next available "Memory Address"
flashing.
3. Rotate the [TUNING] knob to specify the storing memory address.
4. Press the [MEMORY] button again to confirm. You can also wait for 3 seconds
to auto store the station into memory.
METHOD 2: SEMI-AUTOMATIC STORING STATION
While operating the "Auto Browse Station"
(refer to page 11) function, you can simply
press the [MEMORY] button to store the
station into memory to avoid unwanted
stations.