Operation Manual

- - General Setup Page - -

TV Display

OSD Lang

Screen Saver

Last Memory

ENG

Off

16:9 4:3Pan Scan

4:3Letter Box

Wide

1. Press Source button on the remote controller to select DVD input source.

2. Press OPEN / CLOSE button to load from into disc tray.

Hold the disc without touching either or its surfaces, insert the DVD with the label toward the

device’s back panel into the DVD slot on the right side of you TV set.

Only push the DVD slightly until the unit feeds it automatically.

This is used to select the aspect 4:3Pan Scan, 4:3Letter Box, Wide.

Basic Operation

TV Display

9.DVD Operation

General Setup

DVD Setup Mode

·Setup Mode provides the menu for the configuration of General Setup Page, Audio Setup Page,

and Preference Page .

·Item selection in the Setup Menu is done by using the Navigation Arrows, D.SETUP button and the

OK button.

·Press the D.SETUP button first , enter into SETUP menu, then press the DIRECTION RIGHT button,

you can enter into the next Sub-menu.

·Press the D.SETUP button again to exit the Setup Menu.

(DVD MODELS ONLY)(DVD MODELS ONLY)