DIGTAL LED/LCD TELEVISION WITH EDGE LED LIGHTING MODLE: LED19AHRLCBC, LED22AFRLLBB, LED24AFRLFBC
CONTENTS Safety Precautions About this manual / Safety Information Product disposal Safety precautions Handling the LED/LCD screen 1 1 2 4 User Guidance Information Device Overview Desktop Mounting / Wall Mounting Connecting an Antenna Remote Control Precautions / How to use remote control 6 8 9 10 12 Basic Use Turning on the TV / Selecting Input Source 13 Operation Channel Menu Picture Menu Sound Menu Time Menu Lock Menu Setup Menu Screen Menu (Only for PC) Electronic Progrm Guide (EPG) Personal Vid
head
may 5
User Guidance Information Device Overview 7 6 1.POWER button 2.VOL+/- button - Adjust Volume 3.CH+/- button - Change Channel 4.MENU button - Display OSD menu. 5.INPUT button - Display Input Source menu. 6.Standby LED 7.
User Guidance Information COAX AV R L HDMI2 Device Overview DC IN USB HDMI1 Y VGA Pb Pr RF IN Connecting the Power Cable 1. Connect the small round plug on the power adaptor cable to the power input socket at the rear of the set. 2. Connect the mains cable between the power DC IN adaptor and the mains supply.
User Guidance Information When wall mounting TV use only a wall bracket approved by the manufacturer. This device is compatible with standard 100mm X 100mm mounting bracket using the 4 points on the back of the unit as marked in the image below.
User Guidance Information Connecting an Antenna 9
Remote Control 10
Remote Control 11
User Guidance Information Precautions Remove battery cover. Insert two AAA batteries. Replace the battery cover. CAUTION : Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the national code (Recycling program). How to use remote control The remote control should be operated within 30 feet (7m) and 30 to the left and the right of the IR sensor at the front of the TV. Used batteries should be disposed of properly.
Turning on the TV ATV DTV Media AV PC Component HDMI1 HDMI2 TIPS: You can also use the DTV button on the remote control to instantly select the DTV source.
Channel Menu Press MENU button to display the main menu. Press ◄ / ► button to select CHANNEL in the main menu. CHANNEL C H A N N EL Au to Tu n i n g ATV Ma n u a l Tu n i n g D TV Ma n u a l Tu n i n g Pro g ra mme Ed i t Si g n a l In fo rma ti o n MoveMo ve MENU RReturn e tu rn Se lOK e ct Select Exi t EXIT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the CHANNEL menu. 2. Press OK button to adjust. 3.
Channel Menu Press ▼ / ▲ button to select AFC. Press ◄ / ► button to select On or OFF. Press ▼ / ▲ button to select Search, then press OK button to start tuning. Press Red button on your remote control to save the settings and press MENU button to return back to the previous menu. DTV Manual Tuning Press ▼ / ▲ button to select DTV Manual Tuning, then press OK button to enter sub-menu. DTV Manual Tuning VHF CH5 Press OK to search 177 .
Channel Menu Signal Information Press ▼ / ▲ button to select Signal Information, the press the OK button to see the detail information about the signal. Si g n a l In fo rma ti o n Channel 29 F requency 538.
Picture Menu Press MENU button to display the main menu. Press ◄ / ► button to select PICTURE in the main menu. Picture Mode Contrast Brightness PICTURE Color 48 Tint Sharpness 50 0 Colour Temp Noise Reduction MoveMo ve Move MENU RReturn e tuReturn rn Standard 85 50 Se lOK eSelect ct Select Cool Middle ExiExit t EXIT EXIT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the PICTURE menu. 2. Press OK button to adjust. 3.
Picture Menu NOTE: Contrast: This item can adjust the highlight intensity of the picture, but the shadow of the picture is invariable. Brightness: This item can adjust the brightness of the entire picture, it will effect the dark region of the picture. Colour: This item can adjust the saturation of the Colour based on your own preference. Tint: This item may use in compensating color changed with the transmission in the NTSC code. Sharpness: This item can adjust the peaking in the detail of the picture.
Sound Menu Press MENU button to display the main menu. Press ◄ / ► button to select SOUND in the main menu. SOUND Move Move MENU Return Return Sound Mode Treble Bass Balance Standard 50 50 0 Auto Volume SPDIF MODE AD Switch Off PCM Off OK Select Select EXIT Exit Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the SOUND menu. 2. Press ◄ / ► button to adjust. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Sound Menu NOTE: Balance: This item can adjust the speaker’s output, it enables you to listen to best sound balance at your position. Auto Volume: This item can be used for reducing the difference between channel and program’s volume automatically. It makes the overall volume to be even. This function will also reduce the fluctuation of the sound.
Time Menu Press MENU button to display the main menu. Press ◄ / ► button to select TIME in the main menu. Clock Time Z one Sleep Timer Auto Standby OSD Timer T IM E Move Move Return MENU Return OK 20/Jul 13:12 NSW/ACT Off 4H 30s Select OK Select EXIT Exit EXIT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the TIME menu. 2. Press ◄ / ► button to adjust. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Lock Menu Press MENU button to display the main menu. Press ◄ / ► button to select LOCK in the main menu. Lock System Set Password Block Program Parental Guidance Key Lock Hotel Mode Loc k Move Move MENU Return Return Off NO BLOCK Exit EXIT Select OK Select Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the LOCK menu. You should enter password if you want to adjust in the LOCK menu. Default password is ‘0000’. 2. Press ◄ / ► button to adjust option. 3.
Lock Menu Press ▼ / ▲ button to select the program you want to lock, then press Green button on your remote control. (To unlock program, input the password you set.) Press OK button to save setting and menu button to back to the previous menu. Parental Guidance Press ▼ / ▲ button to select Parental Guidance, then press OK button to enter sub-menu to select. Key Lock Press ▼ / ▲ button to select Key Lock, then press ◄ / ► buttont to select Off or On.
Lock Menu Max Volume Press ▼ / ▲ button to select Max Volume, then press ◄ / ► buttont to adjust the value. After set the Max Volume, the volume can’t be adjusted above the max volume. Import (USB Clone Function) Press ▼ / ▲ button to select Import, then press OK button to import hotel settings from USB disk. Export (USB Clone Function) Press ▼ / ▲ button to select Export, then press OK button to export hotel settings of this TV to USB disk.
Setup Menu Press MENU button to display the main menu. Press ◄ / ► button to select SETUP in the main menu. OSD Language T T L an g u ag e English West Hearin g Imp aired PVR F ile Syst em Asp ect Rat io Blu e Screen SET U P Of f 16: 9 On F irst Time In st allat io n Reset So f t ware Up d at e( USB) Move MoveMove MEN U MENU M EN U Retur n Return Return Select Select OK Select IT Exit EXIT EXIT EXExit Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the SETUP menu. 2.
Setup Menu Aspect Ratio Press ▼ / ▲ button to select Aspect Ratio, then press OK button to enter sub-menu. Press ▼ / ▲ button to select Aspect Ratio . (Available options: Auto, 4:3, 16:9, Zoom1, Zoom2). Blue Screen Press ▼ / ▲ button to select Blue Screen, then press OK button to select On or Off. First Time Installation Press ▼ / ▲ button to select First Time Installation, then press OK button to set relevant options including OSD language, country and tuning.
Screen Menu (Only for PC) Auto Adjust H-Offset V-Offset Size SCREEN 50 50 50 Phase Position Reset Move MoveMove MENU M ENU Return Return Return Select Select OK 50 Select EXIT Exit Exit EXIT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the SCREEN menu. 2. Press OK button to adjust. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu.
Electronic Progrm Guide (EPG) Press the EPG button on the remote control to enter EPG menu. P RO G RA MME G UIDE 21 Mar 2007 03:00-06:00 21 Mar 2007 05:39 For the best way to start your day, wake up to Australia's number one breakfast show with DAVID KOCH and MELISSA DOYLE for all the latest news, sport and weather.
Electronic Progrm Guide (EPG) Display Press the GREEN button to display the detail information about the program. Schedule Press the YELLOW buttton to see the Schedule List you have done before. (Record or Remind task) Schedule List ▼ ▼ 05:41 21th Mar Delete ▼ Time Date Programme Title 05:55 Wed. 21 Mar SUNRISE 70 7HD Digital 05:59-06:00 Wed. 21 Mar SUNRISE 70 7HD Digital Channel Name Press ▼ / ▲ button to select programme you want to delete, then press RED button to delete.
Personal Video Recorder Mode (PVR) Record When you are watching DTV, you can press ● button to start Record mode. TV will display a record control menu. Press ● button to display or hide the record control menu. Stop Record Press ■ button to stop recording. TV will display a warning message, then press ◄ button to select Yes to return to normal broadcast television. It wi l l sto p P V R. When the storage space of Disk is full.
Personal Video Recorder Mode (PVR) Use RED button to delete the selected video. Use GREEN button to see the detail of the selected video. Use OK button to start playback the selected video. Use ◄/► button to select playback control icon in record control menu, then press OK button to execute. TIPS: The ► , , , , , button on the remote control is as same as playback control icon in record control menu. Time Shift When you are watching DTV, you can press ► button to start Time Shift mode.
Media Player Mode Note: Before operating Media menu, plug in USB device, then press INPUT button to set the Input Source to Media. Press ▼ / ▲ button to select Media in the Source menu, then press OK button to enter. Press ◄ / ► button to select the media type you want to play in the main media menu, then press OK button to enter. Photo Press ◄ / ► button to select PHOTO in the main media menu, then press OK button to enter.
Media Player Mode Press DISPLAY button to display or hide control menu. Press ◄ / ► button to select function icon in control menu, then press OK button to excute. Press ■ or EXIT button to return back to previous menu. TIPS: The , , , , , button on the remote control is as same as function icon in control menu. R e p e a tA l l Mu sic Playlist in fo R ota te Repeat Press ◄ / ► button to select Repeat option, press OK to select Repeat none / all / 1.
Media Player Mode Music Press ◄ / ► button to select MUSIC in the main media menu, then press OK button to enter. USB2.0 PHOTO MUSIC MOVIE TEXT Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return file to back to the previous menu. When highlighting the option you select, the file information will appear on the right and music will be played.
Media Player Mode Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press OK button to play. R e pe a t A l l MUTE Press DISPLAY button to display or hide control menu. Press ◄ / ► button to select function icon in control menu, then press OK button to excute. Press ■ or EXIT button to return back to previous menu. TIPS: The , , , , , button on the remote control is as same as function icon in control menu. The most of the Music function are the same as the PICTURE.
Media Player Mode Movie Press ◄ / ► button to select MOVIE in the main media menu, then press OK button to enter. USB2.0 PHOTO MUSIC MOVIE TEXT Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu. When highlighting the file you select, the file information will appear on the right and movie will be previewed in the center. Press OK button to play the selected movie.
Media Player Mode Text Press ◄ / ► button to select TEXT in the main media menu, then press OK button to enter. USB2.0 PHOTO MUSIC MOVIE TEXT The most of the TEXT function are the same as the PICTURE.
Media Player Mode Press DISPLAY button to display or hide control menu on the bottom of TV screen. Press ◄ / ► button to select function icon in control menu, then press OK button to excute function as the following table shows it. Item Supported Mode Function Repeat mode. You can choose from Repeat ALL, Repeat PHOTO/MUSIC/MOVIE Music PHOTO/TEXT Play the background music files. Playlist PHOTO/MUSIC/MOVIE/TEXT Display the playlist. Info. PHOTO/MOVIE Display the information of media file.
Maintenance and Service Troubleshooting 39
Maintenance and Service Specifications Model LED Edge Backlight LCD Panel 19” LED TV 22” LED TV 24” LED TV Panel Size 18.5” 21.5” 23.6” Brightness 250 250 250 1000:1 1000:1 1000:1 1366 x 768 1920 x 1080 1920 x 1080 VIDEO 1 1 1 YPbPr 1 1 1 AUDIO(L/R) 1 1 1 PC/AUDIO(L/R) 1 1 1 HDMI 2 2 2 RF 1 1 1 USB 1 1 1 HEADPHONE 1 1 1 COAX 1 1 1 DC 12V 3.33A DC 12V 4.16A DC 12V 4.16A 40W 50W 50W Contrast Ratio Max.
