User's Manual

WM5347N User Manual
45
7. VPN Setting
The “VPN Settings” window will allow you to set rules for VPN.
7.1. PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private
networks. PPTP does not provide confidentiality or encryption; it relies on the protocol being
tunneled to provide privacy.
7.1.1. PPTP Server
“VPN>PPTP Server”
Name Description
PPTP Server
Enable Activate PPTP server.
Server Name Offer a server name.
Auth Protocol Require the peer to authenticate itself before allowing
network packets to be sent or received. We support the
following protocol:
 PAP: Password Authentication Protocol.
 CHAP: Challenge Handshake Authentication Protocol.
 MSCHAP: Microsoft Challenge Handshake
Authentication Protocol.
 MSCHAPv2: Microsoft Challenge Handshake
Authentication Protocol, Version2.
Encryption Encryption Scheme:
 None:
 MPPE 40 bits: 40-bit encryption with MPPE.
 MPPE 128 bits: 128-bit encryption with MPPE.
 Auto: automatically select.
Local IP Address The IP of router.
Remote Start IP As sessions are established, IP addresses are assigned
starting from “Remote Start IP”.
Idle Timeout Disconnect if the link is idle for the assigned seconds.
DNS Server 1 The primary DNS (Domain Name Server) addresses to the