User's Manual

WM5347N User Manual
33
End Port Enter the starting and ending port range.
Open protocol Which protocol will be opened if the rule had been
triggered? Available options are: TCP, UDP or TCP/UDP.
Open Start and End
Port
Which ports range of the protocol will trigger the rule?
Enter the starting and ending port range.
Save Commit the changes made and save to CPE device.
Cancel Reset fields to the last saved values.
Figure 28. Advanced>NAT>Port Trigger>Wizard
6.1.3. DMZ
The “Advanced>NAT>DMZ” tab allows you to configure a DMZ (Demilitarized Zone) host IP
address. Enter the IP address of the DMZ host. The “Save” button will save the changes to CPE
device and the “Cancel” button will reset the field to last saved value. Enter “0.0.0.0” to disable DMZ
host.