IP3093-L Communicator mini Quick User Guide Copyright © 2013, All Rights Reserved.
MOCET IP3093-L Communicator mini Quick User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MOCET IP3093-L Communicator mini Quick User Guide 6. You may clean the device using a fine damp cloth. Never use solvents (such as trichloroethylene or acetone), which may damage the device’s plastic surface. Never spray the device with any cleaning product whatsoever. 7. The device is designed to work in temperatures from 5oC to 40oC. 8. The device must be installed at least 1 meter from radio frequency equipment, such as TVs, radios, hi-fi or video equipment (which radiate electromagnetic fields). 9.
MOCET IP3093-L Communicator mini Quick User Guide Introduction The MOCET™ Communicator mini™ is an innovative audio accessory that enables you to use your Apple™ iPad mini, or iPhone 5, 5s or 5c as a desktop phone with popular Social Networking apps like FaceTime, Skype, Viber, Line and others as well as Unified Communications (UC) apps, like CounterPath Bria iPad Edition, Cisco Jabber for iOS, Avaya Flare, Radvision Scopia, Polycom RealPresence, Microsoft Lync2013, and others, available from the Apple™ Ap
MOCET IP3093-L Communicator mini Quick User Guide 1. 2. 3. 4. Main unit x 1 Handset x 1 Handset cord x 1 Power adapter with cord x 1 5. 6. 7. AUX-in cable x 1 Quick start guide x 1 Warranty card x 1 Setting up the Communicator mini™ 1. Adjust the stand After unpacking the product package box, place the Communicator mini on the table and slightly pull the stand apart from the bottom shell to a comfortable viewing position. 2.
MOCET IP3093-L Communicator mini Quick User Guide main unit will light up and an alert sound will indicate that the Communicator mini is ready to go. 4. Connect the external speaker IP-SPKR (optional) You can connect an external speaker to the SPKR jack in the back of the Communicator mini. 5.
MOCET IP3093-L Communicator mini Quick User Guide Appearance and Buttons The figures below show the appearance of both sides of the Communicator mini along with the user interface buttons and handset. The front panel is capacitive touch design to allow the user to control the volume of the speaker, handset and headset of the Communicator mini. To make, answer, transfer, join,hold or end a call, please use the controls on the iPad mini or iPhone app or built-in phone app of the iPhone.
MOCET IP3093-L Communicator mini Quick User Guide Function Description for Interface of Communicator mini™: Speaker For audio playing, ring and hands-free talking. 2 Lightning connector For Mobile device charging when it is seated on the Lightning connector. Also, data synchronization supported between your Mobile device and a connected computer at micro-USB port. [Note]: If you need a connector for another type of device, please contact MOCET directly.
MOCET IP3093-L Communicator mini Quick User Guide 8 Charging port USB port for charging your second mobile device. 9 Cable tray (slot) Put handset cord in the tray to prevent accident pull force on the handset. 10 Hand Handset connector for connecting the handset cord. 11 MIC IN Microphone connector for connecting the external microphone (IP-MIC). It is an optional accessory. Please order the IP-MIC separately from MOCET. 12 EXT Extension box connector. Not used.
MOCET IP3093-L Communicator mini Quick User Guide Pairing Your iPad mini or iPhone with Bluetooth 1. Prepare your iPad mini or iPhone On your device, go to Settings > Bluetooth. Turn Bluetooth on. 2. Prepare your Communicator mini Touch and hold the Bluetooth button on the Communicator mini for three (3) seconds, until the Bluetooth button blinks. The Communicator mini is now in pairing mode. if you want to stop pairing mode, touch and hold the Bluetooth button again for three (3) seconds. 3.
MOCET IP3093-L Communicator mini Quick User Guide Basic Operations To use the Communicator mini, your iPad mini and iPhone not have to be docked; it will either be connected by Bluetooth when in range of the Communicator mini, or connected by the included AUX-in cable*. Here, we use Skype™ as an example. 1. Making and answering calls When you make a call, the Communicator mini speaker automatically comes on unless you pick up the handset. When a call comes in, the Communicator mini rings.
MOCET IP3093-L Communicator mini Quick User Guide 5. Charging a second device using the USB host port on the Communicator mini You can use the USB port on the left side of the Communicator mini to charge a second device. Using the charging cable included with the second device, connect it to the Communicator mini USB port. 6. Using the AUX-in cable instead of Bluetooth pairing There are still quite a few apps for the iPad mini or iPhone that do not support Bluetooth.
MOCET IP3093-L Communicator mini Quick User Guide Warranty Information Thank you for your choice of product. Remember to record your Communicator mini information below for further support service, if needed. This device has Model number, Bluetooth ID and Serial Number which are located on the back of the base unit. Please record them for service and support personnel.
