IP3093-U Communicator mini Quick User Guide Copyright © 2013, All Rights Reserved.
MOCET IP3093-U Communicator mini Quick User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MOCET IP3093-U Communicator mini Quick User Guide 6. You may clean the device using a fine damp cloth. Never use solvents (such as trichloroethylene or acetone), which may damage the device’s plastic surface. Never spray the device with any cleaning product whatsoever. 7. The device is designed to work in temperatures from 5oC to 40oC. 8. The device must be installed at least 1 meter from radio frequency equipment, such as TVs, radios, hi-fi or video equipment (which radiate electromagnetic fields). 9.
MOCET IP3093-U Communicator mini Quick User Guide Introduction The MOCET™ Communicator mini™ is an innovative audio accessory that enables you to use your mobile tablet or smart phone, like Google Nexus 7, or Nexus 4, Samsung Galaxy series or Galaxy Note series, as a desktop phone with popular Social Networking apps like Skype, Viber, Line and others as well as Unified Communications (UC) apps, like CounterPath Bria Android Edition, Cisco Jabber Video, Avaya one-X® Mobile, RADVISION’s SCOPIA Mobile, Polyco
MOCET IP3093-U Communicator mini Quick User Guide 1. 2. 3. 4. Main unit x 1 Handset x 1 Handset cord x 1 Power adapter with cord x 1 5. Flip-side micro-USB connector module x 1 6. AUX-in cable x 1 7. Quick start guide x 1 8. Warranty card x 1 Setting up the Communicator mini™ 1.
MOCET IP3093-U Communicator mini Quick User Guide Step3: Place the Communicator mini on the table, and face to the Smile Face on the flipside micro-USB connector module, and insert it in the module cave firmly. 2. Adjust the stand Place the Communicator mini on the table and slightly pull the stand apart from the bottom shell to a comfortable viewing position. 3. Attach the handset Attach the long end of the handset cord to the HAND port in the back of the Communicator mini.
MOCET IP3093-U Communicator mini Quick User Guide 4. Plug-in the Power Attach the cord of the power adaptor to the 12VDC port on back panel of the Communicator mini. Plug the power cord into an outlet. When it is powered, the LEDs on the front panel of main unit will light up and an alert sound will indicate that the Communicator mini is ready to go. 5. Connect the external speaker IP-SPKR (optional) You can connect an external speaker to the SPKR jack in the back of the Communicator mini.
MOCET IP3093-U Communicator mini Quick User Guide 6. Connect the external microphone IP-MIC (optional) You can connect an external microphone to the MIC IN jack in the back of the Communicator mini to improve the ability of others on a conference call to hear everyone in the room. Appearance and Buttons The figures below show the appearance of both sides of the Communicator mini along with the user interface buttons and handset.
MOCET IP3093-U Communicator mini Quick User Guide Function Description for Interface of Communicator mini: Speaker For audio playing, ring and hands-free talking. 2 Micro-USB connector For Mobile device charging when it is seated on the MicroUSB connector. Also, data synchronization supported between your Mobile device and a connected computer at micro-USB port. [Note]: If you need a connector for another type of device, please contact MOCET directly.
MOCET IP3093-U Communicator mini Quick User Guide Mute Single touch to control Mute/Unmute of microphone(s). Or, twice touches to Mute/Unmute both Mic(s) and speaker(s). Steady on: Both microphone and speaker are all muted. Slow blinking: Microphone is muted only. [Note]: When mute is on, the external IP-MIC pair will be muted too. You can mute the audio in the tablet or smart phone app or the built-in app. Speaker 5 Touch to enable Communicator mini’s hands-free mode.
MOCET IP3093-U Communicator mini Quick User Guide Pairing Your Tablet or Smart Phone with Bluetooth 1. Prepare your tablet or smart phone On your device, go to Settings > Connections > Bluetooth. Turn Bluetooth on. It may vary by the mobile device that you are using. Please refer to the user manual of the mobile device for operation instructions. 2. Prepare your Communicator mini Touch and hold the Bluetooth button on the Communicator mini for three (3) seconds, until the Bluetooth button blinks.
MOCET IP3093-U Communicator mini Quick User Guide pick up the handset. When a call comes in, the Communicator mini rings. To answer the call, tap the Answer button . 2. Switching between devices during a call Switching a call to your Communicator mini Tap the Bluetooth button Communicator mini. Switching a call back to the tablet, or smart phone. Tap the Speaker button device. 3.
MOCET IP3093-U Communicator mini Quick User Guide You can use the USB port on the left side of the Communicator mini to charge a second device. Using the charging cable included with the second device, connect it to the Communicator mini USB port. 6. Using the AUX-in cable instead of Bluetooth pairing There are still quite a few apps for the tablet or smart phone that do not support Bluetooth.
