GW6200 USER’S MANUAL Copyright © 2008 by TECOM CO. LTD.
GW6200 Product Spec Table of Contents Table of Contents 1. Introduction ..................................................................................................................... 3 2. Getting to Know the Router ............................................................................................. 5 2.1 Specifications ...........................................................................................................................................................5 2.
GW6200 Product Spec Introduction 1. Introduction Congratulate on becoming the owner of the GW6200.Your LAN (local area network) and WAN (wide area network) will now be able to access the Internet using your high-speed Ethernet connection. This Administrator Manual will show you how to install and set up your GW6200. The IG (Intelligent Gateway) provides a variety of functions for users and can support a wide range of application in a complicated environment.
GW6200 Product Spec Introduction (3) To configure each phone and install them into the network. (4) To configure each interfaces and install them into IG. (5) And to solve the problems what users encounter during operation. Copy Right 2008 Tecom, Co. LTD.
GW6200 Product Spec Installation 2. Getting to Know the Router 2.1 Specifications Feature Main Processor Processor SDRAM Processor Flash ROM Supplementary Processor System Flash (Voice Mail) Switch controller System Power: Standards Ports Button Cabling LEDs EMI/EMC: Environmental Additional Info 240MHZ MIPS32 CPU External 64MB External 8 MB 1x DSP AudioCode AC482-C (4 channel/each) 128MB Broadcom BCM5325E 15V/0.8A IEEE802.11g,IEEE802.11b,IEEE802.
GW6200 Product Spec Installation 2.3 Rear Panel The rear panel contains the ports for the unit's data and power connections. Figure 2-2.
GW6200 Product Spec System Features 3. System Features 3.1 Answering Position For incoming calls from PSTN (FXO ports), system provides the flexibility to ring to different destinations: Auto Attendant, Operator or Extension, according to the system service mode (day or night modes). For Extension, system provides the ability to have the calls to ring to one extension or one hunt group. It is also for those incoming VoIP calls from the registered ISP (Uplink Server) to be routed with the same method. 3.
GW6200 Product Spec l System Features n For each leaving message, it's saved 1 - 7 days Voice Messages n Provide two languages service for the all voice files. n Administrators can record the all voice messages by themselves. n Administrators can update, backup or delete the all voice messages on the PC. 3.3 Basic Call To make an intercom call, dial a Station number (IP Terminal, POTS) or a Voice Mail number. To make an outgoing call, dial a phone number.
GW6200 Product Spec System Features 3.9 Daylight Saving Time Daylight Saving Time (DST) feature supports auto adjustment for daylight saving time. 3.10 Direct Inward System Access (DISA) via Auto Attendant The current PSTN/IP lines are all DISA lines. While ringing to AA, the outside callers have direct access to extensions, PSTN/IP lines, Call Routing and Trunk Groups. 3.11 Dynamic DNS GW6200 support Dynamic DNS to see the DDNS host name as GW6200’s WAN IP address in SIP application.
GW6200 Product Spec l l l l l System Features REGISTER, INFO, REFER, SUSCRIBE/NOTIFY and REPLACE messages. SIP Outbound Proxy, SIP Proxy and Registrar Auto-Registration when power-on or period Session Timer support Support IP address, domain name, user name, display name for SIP URL STUN 3.18 Make an Outside Call System provides three methods to make an outside call. l The extension user dials the phone number directly.
GW6200 Product Spec System Features 3.26 Remote Management via PC Programming the IG system database is possible via PC. IG build-in a web server for remote administration. 3.27 System Speed Dial GW6200 stores frequently dialed numbers. These Speed Dial Numbers are accessed for dialing by the associated Speed Dial Directory Numbers. The Speed Dial Directory Numbers are assigned in Numbering Table. GW6200 stores up to 100 Speed Dial Numbers.
GW6200 Product Spec System Features l IP Phone's Web Page Access Control Allow the users access internal IP phone's Web page. There are two methods to follow. n Login system’s Web page. In “Registered Phone” Page, all registered phones will be listed with their IP links. Click the link you can enter IP phone’s Web page. n Use voicemail username and password of IP phone when login system’s Web page. It will give a page list all registered phones with their IP links. 3.
GW6200 Product Spec Configuration Copy Right 2005 Tecom, Co. LTD.
GW6200 Product Spec Appendix Appendix : Product Summary TCP/IP Protocols q IP Protocol (RFC 791) q ARP (RFC 826) / RARP (RFC 903) q ICMP (RFC792) q TCP (RFC 793) q UDP (RFC 768) q SNTP q DNS q HTTP q Telnet q TFTP q RTP q Static Routing q NAT with ALGs IP Address Assignment q Static q Dynamic q Subnet Mask q PPPoE Client (RFC 2516) q Primary and Secondary DNS q DHCP Server (RFC 2131-2132) q DHCP Client (RFC 2132) Routing q RIP v1/v2 q Static routing q DHCP Serv
GW6200 Product Spec q Appendix IP Precedence VoIP Protocols q SIP (RFC 3261) q SDP(RFC2327) t q Real Time Protocol (RTP ; RFC 1889) q MD5 (RFC3261 HTTP) digest authentication q G.168 Echo Cancellation q Voice Codec: G.711, G.729a and G.726 q Support FAX/modem tone detection and auto-fallback to G.711 IP Trunk Support up to 8 IP Trunk, which can register to ITSP carrier.
GW6200 Product Spec Appendix WDS support Configuration Management q LAN/WAN management via Telnet interface or Web-based browser interface q Firmware upgrade available by HTTP q Status display and event report from Web-based management q Settings Save and Restore q Reset to factory default Radio - WLAN q Stansard : IEEE 802.1g and 802.
GW6200 Product Spec INTERNET Appendix Off Flashing On Blue LAN network connection not present. LAN activity present (traffic in either direction). WAN connected. Power Requirement q Input : Voltage Range 120VAC/60HZ or 220VAC/50HZ q Output : Linear 15V DC / 0.8A, 2.
