User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Getting to Know the Router
- 3. System Features
- 4. Phone Features
- 5. Quick Installation
- 6. Configuration
- Appendix 1: Product Summary
- Appendix 2: Auto Attendant and Voicemail System
- Appendix 2.1.2.1 Through IP Phone Client
- Appendix 2.1.2.2 Through FTP Server directly
- Appendix 2.2.1.1 Transfer Call to Outside
- Appendix 2.2.2.1 Leaving messages
- Appendix 2.2.3.1 Listening message
- Appendix 2.2.3.2 Changing Mailbox Password
- 2.2.3.3 Recording Personal Greeting
- Appendix 2.2.3.4 Setting leaving message directly
- Appendix 2.2.4.1 Recording Various Greeting
- Appendix 2.2.4.2 Recording Process Voice Files
- Appendix 2.1.2.2 Through FTP Server directly
- Appendix 2.1.2.1 Through IP Phone Client
- Appendix 3: Feature Access Codes Assignment
GW 6000 Administrative Guide Appendix 3
Appendix 3: Feature Access Codes Assignment
The Feature Access Codes are applied in Tecom IP2007/8 Phones and FXS phone only.
It’s to activate/cancel some GW6000 user-specified functions.
These Feature Access Codes are used when the phone is at idle state.
Direct Call Forward via AA
Forward all of the calls without regard to the extension status.
To Activate
*21 + Ext No
*21 + * + (PSWD) + * + Outside Telephone Number
To Cancel
**21
Busy Call Forward via AA
Forward the calls if the extension is busy.
To Activate
*22 + Ext No
*22 + * + (PSWD) + * + Outside Telephone Number
To Cancel
**22
No Answer Call Forward via AA
Forward the calls if the extension doesn't answer the call within No Answer Time.
To Activate
*23 + Ext No + * + Time
*23 + * + (PSWD) + * + Outside Telephone Number + * + Time
To Cancel
**23
Direct Call Forward to Voice Mail Box via AA
Forward all of the calls to its own Voice Mail box.
To Activate
*24
To Cancel
**24
Do Not Disturb via AA
Extension users can enable DND to stop incoming PSTN or IP Trunk calls from ringing
at their phone.
To Activate
*4
To Cancel
**4
Copy Right 2005 Tecom, Co. LTD. All rights reserved Page 106 of 107