User's Manual

ManualsBrandsTecom ManualsElectronics3G Femtocell Access Point

QUICK START GUIDE

1. WHAT IS IN THE BOX

2. CHOOSING THE BEST LOCATION

Before installing, think about where you want to put your new

Femtocell. The ideal location is somewhere central, away from

windows – this will allow the Femtocell to give the best

coverage possible.

Femtocell with optional wall

fixings (where included)

Data cable to connect the

Femtocell to your broadband

router or cable modem

Mains power supply adaptor and

plug

External GPS Antenna

(Optional)

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE 1. WHAT IS IN THE BOX Femtocell with optional wall fixings (where included) Data cable to connect the Femtocell to your broadband router or cable modem Mains power supply adaptor and plug External GPS Antenna (Optional) 2. CHOOSING THE BEST LOCATION Before installing, think about where you want to put your new Femtocell. The ideal location is somewhere central, away from windows – this will allow the Femtocell to give the best coverage possible.
PAGE 2
3. HOW TO INSTALL YOUR FEMTOCELL STEP 1 – Insert the SIM Card Insert the SIM card provided by your Network Operator with the Femtocell. The SIM card will not lock in place if it is inserted incorrectly – please take care not to force the SIM card in to the slot. STEP 2 – Connect the network cable Connect one end to the Femtocell and the other end to your broadband router or cable modem.
PAGE 3
4. IN THE EVENT OF A PROBLEM If the Red light is on then that means there is a problem with the device. If the Red light is not flashing then please contact customer care who will help you with the problem. If the red light is flashing this means there is a problem which you can resolve yourself.
PAGE 4
Federal Communication Commission Interference Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.