User's Manual

Administrative Guide Introduction

1. Introduction

Congratulate on becoming the owner of the EUT.Your LAN (local area network) and

WAN (wide area network) will now be able to access the Internet using your high-speed

Ethernet connection. This Administrator Manual will show you how to install and set up

your EUT.

The IG (Intelligent Gateway) provides a variety of functions for users and can support a

wide range of application in a complicated environment. Therefore, it needs

Administrator to plan, install and set the whole environment of VoIP communication. And

the knowledge of modern network and Internet technologies are essential for

administrator.

nalog Phone

DSL Modem / Cable Modem

WiFi Phone

Notebook

Figure 1-1. Router Connection Diagram

Interfaces

z WAN Interface: 10/100Base-T Ethernet port

z CO Interface: 3 FXO (Loop Start, for PSTN)

z Analog Device Interface: 1 FXS (for analog Telephone or FAX)

z LAN Interface: 4 Ethernet (10/100Base-T)

z Built-in 802.11g Wi-Fi access point

Terminals

z 1 Analog Terminal

z 24 IP Stations (Wired/Wi-Fi IP Phone)

In principle, the Administration is required to do the following things:

(1) To understand the architecture, resources, and devices of whole environment

which will be involved with the VoIP communications.

(2) To build a common setting file for most users.