User's Manual

Administrative Guide Quick Installation

5.2.8 Call Routing Table

The Call Routing Table automatically routes outgoing calls using the most appropriate

route. The appropriate route is determined based on the number dialed. If necessary,

EUT can automatically modify the dialed number by deleting and/or inserting digits.

Figure 5-8. Call Routing Table

5.2.9 Wizard Setup Finished

When you click “Save & Reboot” Button at above page, the wizard setup will save your

setting and the wizard setup will finished. Then the system will reboot as shown below.

Figure 5-9. Wizard Setup finished

Congratulations! The installation of the GW6000 is complete.

For additional details, advanced configuration, or any other questions, refers to

the next chapter.