User's Manual

ManualsBrandsTecom ManualsElectronicsIntelligent Gatway

Administrative Guide Quick Installation

4. Phone Features

The following features depend on whether the phone provides.

Feature Tecom

IP 2007/8

FXS Other

SIP Phones

Alphanumeric Display Yes Depends Depends

Basic Call Yes Yes Yes

Call Forward via Auto Attendant Yes Yes No

Call Hold Yes Yes Yes

Call Transfer Yes Yes Depends

Call Waiting Yes No Depends

Conference Yes No Depends

COS Following Yes No No

Distinctive Ringing Yes No No

Do Not Disturb via Auto Attendant Yes Yes No

External Call Forward (ECF) via Auto

Attendant

Yes Yes Yes

Feature Key Programming Yes No No

Last Number Redial Yes Yes Depends

LCD & Interactive Buttons Yes No Depends

Mute Yes No Depends

On Hook Dialing Yes No Depends

Page Allow / Deny Yes No No

Phone Book Yes No Depends

Phone Lock/Unlock Yes No No

Speed Dial Yes No Depends

Volume Control Yes Depends Depends

Tips: the word “Depends” means that the features depend on whether the phone

provides.

4.1 Alphanumeric Display

The IP Phone extension provides a graphic LCD that supports 64 alphanumeric

characters. The LCD enhances many system features.

4.2 Basic Call

To make an intercom call, dial a Station number (IP Terminal, POTS) or a Voice Mail

number.

To make an outgoing call, dial a phone number. System chooses a line (PSTN line or IP

trunk) via Call Routing Table to dial out. If it includes “*” in the phone number, and the

call is dialed through PSTN Trunk, it will be as a one second Pause time.

To make an outgoing call, dial a PSTN, an IP Trunk or a Trunk Group number first. After

hearing dial tone, dial the phone number.

4.3 Call Forward via Auto Attendant

Auto Attendant Call Forwarding reroutes incoming trunks calls from one extension to

another destination. The destination of a call forward can be another extension or an

outside phone number (External Call Forward; ECF).

EUT support the following Call Forwards: