User's Manual

Administrative Guide Configuration

6.4.4 NAT

It’s separated into three parts: Virtual Servers, Port Trigger, and DMZ.

6.4.4.1 Virtual Servers

Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol,

IP address and service port) to the internal server with private IP address on the LAN

side. The Internal port is required only if the external port needs to be converted to a

different port number used by the server on the LAN side. (Figure 6-12-1, Figure 6-12-2)

Figure 6-12-1. Advanced Setup – NAT – Virtual Servers