User's Manual

Administrative Guide Configuration

6.5 Wireless

This directory display only when wireless card is installed in your EUT board. Use

the Wireless screen to configure the EUT for wireless access. It is separated into 6

parts:

z Basic

z Security

z MAC Filter

z Wireless Bridge

z Advanced

z Station Info

The configurable items for each part would be described in the following.

6.5.1 Basic

The page (Figure 6-21) allows you to configure basic feature of the wireless LAN

interface. You can enable or disable the wireless LAN interface, hide the network from

active scans, set the wireless network name (also known as SSID) and restrict the

channel set based on country requirement.

Figure 6-21. Wireless – Basic

6.5.2 Security

The page allows you to configure security features of the wireless LAN interface. You

can set the network authorization method, select data encryption, specify whether a

network key is required to authenticate to this wireless network and specify the

encryption strength.

The following items will be configured in the page:

Network Authentication: Set the network Authentication method. 802.1X and WPA

require setting valid RADIUS parameters. WPA-PSK requires a valid WPA Pre-Shared

Key to be set. (Figure 6-22-1)