User's Manual


‐24‐

Ver.2.0
Figure 3.4.3‐2
WPS Settings
There two WPS mode, one is PIN code and other one is PBC.
PIN method in which a personal identification number (PIN) has to be
read from
either a sticker or display on the new wireless device. This PIN must then be
entered at the "representant" of the network, usually the network's access
point. Alternately, a PIN provided by the access point may be entered into the
new device. This method is the mandatory baseline mode and every
WPScertified product must support it.
Push button method
in which the user has to push a button, either an actual or virtual one, on
both the access point and the new wireless client device. Support of this
mode is mandatory for access points and optional for connecting devices.