User's Manual

TECOM CO., LTD. TECOM Bluetooth Access Point PROJECT
Prepared by: CPE-U1 Internal Document
[Product Revision Information] Page Revision Date Issued
User's Manual 12(4) 0.1 08-30-2002
Compliance:
• Bluetooth Core Specification 1.1 Qualified
Bluetooth Security
• Security Mode 1 (non-secure)
• Security Mode 2 (service level enforced security)
• Security Mode 3 (link level enforced security)
• Web Interface Access Set-up Options
Web Management and Configuration
• Password-protected Configuration Access:
• LOCAL CONNECTION, OVER BLUETOOTH OR ETHERNET LAN
• HTTP-based interface (RFC 2616/2617)
• Static IP addressing
4.1.2. Physical
LED Status Indicators
• Power/Status, Bluetooth and Ethernet Link and Activity
Hardware connectors:
• LAN port: RJ-45
• Programming Local port: Serial 10-pin Sub-D female
Input Power Requirement: Depends. Please refer to the specific design (usually
between 5 to 12 VDC, 1.0 amp)
4.1.3. Bluetooth Qualification
For the complete Qualified Product Listing Notice see
http://qualweb.bluetooth.org/Template.cfm?LinkQualified=QualifiedProducts&Details=Y
es&Produ
ctID=
5. Troubleshooting Guide
This chapter provides troubleshooting tips and procedures for basic problems with the
Access
Point.