User's Manual

TECOM CO., LTD. TECOM Bluetooth Access Point PROJECT
Prepared by: CPE-U1 Internal Document
[Product Revision Information] Page Revision Date Issued
User's Manual 11(4) 0.1 08-30-2002
Figure 9 Configure on Locator
3. Upgrade
N/A
4. Web
The basic Web Interface let user can monitor and configure Access Point and
all of Bluetooth device information in anywhere.
5. AutoIP
N/A
4. Technical Specifications
The Ubicom Bluetooth Access Point Reference Design is a complete Bluetooth™
access point with robust networking features required for IP networking over Ethernet.
4.1.1. Basic Features
Wireless Interface:
• Works with ANY radio/baseband (the standard HCI Layer over top-speed
UART)
• Bluetooth Core Specification 1.1
LAN Interface:
• LAN Protocol: IEEE 802.3x, ISO8802.3
• 10 Base-T Ethernet
• IP over IEEE 802 (RFC 1042)
Bluetooth SIG Profiles
• LAN Access Profile (LAP), selectable 1 to 7 users
• Dial-up Networking Profile, selectable 1 to 7 users
• Generic Access Profile (GAP)
Bluetooth Clients supported
• Point-to-multipoint with 1.1 clients supporting LAN Access Profile (LAP)