User Manual

Chapter 3: TECOM Bluetooth Module BT3010 UART Firmware Download
9
5. In the “Firmware” box, please select “UART”, “ASCII”, and “On Chip”. Then click on
“Choose Firmware File” to select the appropriate firmware. For USB interface, the user
shall select “BBTFW_2_1_003(UART).hex” in the “Firmware” directory. (as Figure 4)
Figure 4: Downloader Configuration for UART Interface
6. Click on the “Execute Download” button. Status messages should appear in “Status”
window as the download procedure progress. (as Figure 5)
Figure 5: Executing firmware download procedure