User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:8/26
Note:
1. There are 2 EKT lines from KSU to the base.
2. If the handset ID is #1 means the handset is connect to the Line#1. If the handset ID is #2
means the handset is connect to the Line#2.
(4) If the registration function fails, the LCD will display:
Note:
If user wants to register again, he can follow the above procedure to re-register to base unit.
(6) Finally, change the DIP SWITCH on the base changes to normal mode.
(It means: Switch-1, 2, and 3 are OFF)
Note:
1. The LED on the base will flash [Normally] when the unit comes back to normal mode.
2. About the Programming mode, please refer to the part of the programming mode for further
detail.
2. De-Registration Programming by the Base
If user wants to de-register all handsets or remove one handset only, user can de-registration the
handset by the base unit. But, the handset unit must be moved to near the base to receive
de-registration command from base unit. After de-registration, the handset unit won’t link with the
FAILED!
TRY AGAIN!
1 2 3
ON
REGISTERED
HANDSET
#
1