User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:6/26
II. System Installation
1. Easy Installation
The [Registration] programming will allow handset user to register the handset to the base unit.
(1) First of all, enter the registration mode on the base unit.
(2) And then, select the handset is in the registration mode, too.
(3) Move the handset near the base.
(4) The system will automatically register the handset and assign the handset ID.
Operation Procedure:
(1) First of all, enter the registration mode on the base unit.
Turn on the DIP SWITCH-1 and turns off the other 2 switches. After 5 second, the system will
enter the registration mode.
(It means: Switch-1 is OFF, Switch-2 and 3 are ON)
Note: The LED on the base will flash [Fast] when enter the registration mode.
(2) If the handset was never registered, the LCD will display the following message.
Or, press and hold the [F1] key over 1 second to enter the System Programming mode.
The LCD will display:
PLEASE
REGISTER!
1 2 3
ON