User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:24/26
User must come back to near the base, or the call will be dropped within 30 seconds.
3. No Link to Base Status
If the handset is put far away from the base or the power of the base unit is removed, the handset
will display [NO LINK TO BASE] to indicate the handset can’t link with the base. Of course, the
row-2 and row-3 of the LCD won’t receive information from base. So, it will be blank on the
row-2 and row-3.
User must come back to near the base, or check the base power status.
User also can re-register the handset to make sure the registration status.
4. Ring and Vibrator Status
If user sets [Ring mode] only, it will only display [Ring] icon only on the LCD.
If user selects [Vibrator mode] only, it will display vibrator icon only on the LCD.
If user selects [Ring and Vibrator mode], it will display both ring and vibrator icons on the LCD.
NO LINK TO BASE
(( ))
(( ))