User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:23/26
IV. Extra Function Information
The cordless system will provide more information for RF Link status and Battery Power status.
User can easily find the current handset status about the RF Link and Batter status.
Note:
1. All new information about RF and Battery status will be displayed on the row-1 of the LCD.
2. The row-2 and 3 of the LCD display won’t be affected.
1. Low Battery Power Status
The handset will display battery power status icon on the upper right corner of the LCD. If the
battery power is too low to work, the unit will also display [LOW BATTERY] character before the
battery is out of power completely.
If the handset is not in the standby mode, the icon would be flashing at the cadence of 0.5 sec
on-and-off repeatedly when the battery power is too low. However, it can’t flash when low battery
and in standby mode. If the handset is in the talk mode, the unit will also generate the warning
beep for user’s reference per 15 seconds.
2. Out Of Range Status
If the handset is in the talk mode and user goes far away from the base, the handset will display
[OUT OF RANGE] and generate the warning beep per 5 seconds. The LCD will display:
LOW BATTERY _
OUT OF RANGE