User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:19/26
=> …]. And, if press [F2] key, the change sequence is [RING + VIB => VIBRATOR => RING
=> RING + VIB => …… ].
5. Auto Pick Up Programming
The [Auto Pick Up] Programming will allow user to pick up the phone call by receiver or
handsfree mode when user lifts the handset from cradle.
There are 3 modes for [Auto Pick Up] programming mode.
The select item: RECEIVER, HANDSFREE, and DISABLE.
Default: RECEIVER.
Standby, press and hold the [F1] key over 1 second to enter the [PROGRAM MODE] and then
select the corresponding item, the LCD will display:
Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display:
Press [F1/F2] key to change the item.
Or
(( ))
>AUTO PICK UP
RELEASE CALL
(( ))
AUTO PICK UP
RE
C
EIVER
(( ))
AUTO PICK UP
HAND
S
FREE
(( ))
AUTO PICK UP
DI
S
ABLE