User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:18/26
Press [F3] (the same as [OK] key) to enter the change mode, the LCD will display:
Press [F1/F2] key to change the item.
Press [F3] (the same as [OK] key) to confirm, the LCD will display: (Select [Ring] mode only)
If user selects [Ring and Vibrator] mode, it will display both ring and vibrator icons on the LCD.
Note:
1. The unit will generate the reference ring or/and vibration for the user to refer the ring type.
2. The mark [√] means that user enables this function.
3. There are some icons ((
)) on the row-1. It will indicate user’s setting. Ring and/or
Vibration.
4. Press [F1] key, the change sequence is [RING => VIBRATOR => RING + VIB => RING
(( ))
>VIBRATION
AUTO PICK UP
(( ))
VIBRATION
√
RIN
G
√
VIBRAT
O
R
VIBRATION
√
RIN
G
VIBRAT
O
R
VIBRATION
√
RIN
G
(( ))
VIBRATION
√
RIN
G
√
VIBRAT
O
R