User's Manual

TECOM CO., LTD.
23, R&D ROAD 2, SBIP
HSIN-CHU, TAIWAN, ROC
PHONE: [phone]
FAX: [phone]
Subject: Quick System Setup and Reference Guide for Cordless DK Telephone System Date: Jul. 23, 2004
Author: SOHO Department, CPE R&D Division, TECOM Revision: 03
Email: [e-mail] Page:16/26
Note: You can refer to the part of System Installation for further detail.
3. De-Registration Programming by the Handset
If user doesn’t use the handset any more or wants to register the handset to the other base, it may
be necessary to cancel the registration to original base.
Only one handset can de-register to the base at a time. And please make sure the system is not
being used and the handset must near the base unit.
Standby, press and hold the [F1] key over 1 second to enter [PROGRAM MODE] and then select
the corresponding item, the LCD will display:
Press [F3] (the same as [OK] key) to enter the mode, the LCD will display:
Press [F1/F2] key to select the [YES?] mode.
You can select [YES] to de-register, or [NO] to exit this mode.
(( ))
>DE-REGISTER
VIBRATION
(( ))
DE-REGISTER
NO?
(( ))
DE-REGISTER
YE
S
?
REGISTERED
HANDSET
#
1